Electronic evaporator instructions for use. Instruction manual for electronic cigarettes

Dear readers, we have already come a long way in studying issues related to electronic cigarettes. And now you have a sufficient level of knowledge and understanding on general issues for the initial stage.

The power supply/battery pack with a non-replaceable battery is charged either through a connector (the part that connects to the vaporizer) or through a separate connector. In the vast majority of cases, the cable that charges the device, on the other hand, is equipped with a standard USB connector.

Therefore, to charge an electronic cigarette, you can use either the USB port of your computer or a special adapter for the electrical network.

The electronic cigarette is charged until the color of the corresponding indicator changes (another reason to use high-quality electronic cigarettes, they provide this).

If there is no charging connector, and the battery can be removed from the battery pack, then a separate charger is required. Such a charger is marked with the ability to charge lithium batteries and a maximum charge level of 4.2 V.

Using external chargers, we focus on their own indication.

How to fill an electronic cigarette?

How to fill an electronic cigarette also depends on its design. Please open the article "" and familiarize yourself with the existing options for the implementation of "liquid storage" (how liquid for electronic cigarettes is stored in a particular vaporizer).

Today's personal vaporizers (electronic cigarettes) use three fundamentally different design solutions related to the storage of liquid for electronic cigarettes. Based on the features of these structures, an appropriate method for their filling is proposed.

In devices where the supply of liquid is stored in a porous storage (usually a synthetic winterizer), liquid for electronic cigarettes is dropped directly into it. This also happens in the case of using traditional synthetic winterizer cartridges (510th, 901st, A and B formats, as well as the 701st cartridge).

In “liquid form”, the slurry is stored either in tanks (outwardly similar to synthetic winterizer cartridges, only without synthetic winterizer), or in tanks. The tanks are usually removed/separated from the evaporator. You can fill them either by removing the tank cover, or directly through the hole in it.

General information about cartridges and tanks can be found in this article:. There are also other ways of refueling. For example, a corresponding valve is provided, in it is necessary to unscrew the upper part of the tank and fill it from above, and in filling it is carried out with a bottle with a thin spout through the hole in the top cover of the tank.

If we are talking about a device with a “liquid chamber” (when the evaporation chamber itself is the place to store the liquid), then the liquid for electronic cigarettes is poured / dripped directly into it. Such devices usually use mouthpieces with a wide opening for instillation - they have a separate name "drip-type".

It should also be noted another "subspecies" of devices in which refilling liquid for electronic cigarettes occurs by direct instillation. Devices for use can be divided into two main categories: full-fledged devices with a liquid chamber, with an upper and lower non-spill, and the so-called “side-blowing” RDAs. The popularity of such devices with side airflow is explained simply - they are structurally simple, and it is easy to make them even for small manufacturers (more about the inferiority of such devices is written in the mentioned series of articles).

Since such devices, when carried and laid on their side, “leak” (liquid pours out through the airflow hole located on the side), users of such devices resort to tricks with wicks. They have to fill most of the space in the lower part of the evaporation chamber with long wicks - in this case, such wicks simultaneously act as both a spiral wick and a supply (essentially storage) wick. Or they resort to wicks from combustible materials not intended for vaping, in particular from cotton wool.

In such cases, these are no longer devices with a liquid chamber, but devices with a porous liquid storage. Accordingly, the filling of such vaporizers (electronic cigarettes) is carried out by instillation of liquid directly onto the coil wick.

If, dear readers, after reading, there is no complete understanding of how to fill an electronic cigarette, do not worry. The filling process is usually described in the instructions. Also, attention is drawn to this in the reviews of the corresponding devices.

How often to change the replaceable evaporative elements (“heads”)?

Also, replaceable evaporative elements are present in many modern "entry" level devices. Including in eGo-C / eGo-CC vaporizers from Joyetech.

How often you need to change the evaporative elements primarily depends on the characteristics of the e-liquid used for electronic cigarettes. For understanding, please read this article: .

The simplest and most obvious recommendation for determining the frequency of replacement of evaporative elements is to focus on "taste". If the taste of steam deteriorates and ceases to satisfy the user, it is time to change the evaporation element. When you start using the selected device, learn to determine it quickly enough.

Vaporizer maintenance for electronic cigarettes

In the previous part of the article, we talked about the complete replacement of evaporative elements. When the taste ceased to suit the user, then we change it.

However, this period can (and even should;)) be extended. This is achieved by maintaining the evaporators.

Any (ANY!) evaporator requires maintenance. After all, it doesn’t bother anyone that you need to wash your hands, brush your teeth, and carry out other hygiene procedures. "Regular" cigarettes do not need to be serviced, because they are "disposable" - smoked and threw away the cigarette butt. The electronic cigarette is used for a long time. That's why it needs maintenance.

Maintenance involves rinsing the atomizer elements: e-liquid storage tank, evaporator element, mouthpieces/drip tips. Hot water is usually sufficient. To improve the result, it is advisable to use alcohol (put the parts washed in water in a container with alcohol and let them “soak” well there). Alcohol well dissolves the liquid that “clogged” the wicks, and also partially removes carbon deposits from the spiral. After soaking in alcohol, the device should be rinsed again in hot water and let dry thoroughly.

Washing itself is good. But for a better restoration of the characteristics of the evaporator, the spiral and wicks should be burned. Almost all evaporators provide access to the coil (in some it is necessary to remove the protective cap, in some it is necessary to pull out some other part - it is better to get acquainted with this in the reviews of the corresponding devices). When access to the spiral appears, we connect the evaporator to a power source and apply voltage. The coil is heated, during which the formed carbon deposits are removed. We burn until the spiral becomes “clean”. To clean the coil from burnt particles, you just need to blow well into the evaporator element from different sides.

If the design of the device provides for long wicks, it is advisable to burn them with a turbo lighter or burner. It is not advisable to use a "regular" lighter - soot will remain on the wick. Therefore, a turbo lighter or a specialized burner is used.

About battery life in power supplies

No matter what kind of power source our electronic cigarette is equipped with, there is a battery inside it. Any battery loses its original properties over time and during operation. There is nothing surprising. The same is observed in all familiar household appliances (the simplest example is mobile phones).

However, with regard to electronic cigarettes, additional factors must be taken into account.

The modes of operation of batteries in vaping are more “cruel”. In many cases (especially in varivolts and mechanical mods when using low resistance vaporizers), the battery is operated with increased current. From this, its degradation (loss of original properties and characteristics) occurs more intensively.

It should also be borne in mind that batteries of a smaller capacity lose their properties faster than more capacious ones.

Therefore, it is immediately worth considering batteries (which are replaceable for collapsible battery packs, which are non-collapsible power supplies) as consumables. Over time, they become unusable, for which you need to be prepared.

Very low-capacity batteries (up to 300 mAh) with an average intensity of use will last about 6 months. Batteries with a capacity of 650 - 1000 mAh will be in operation from a year to a year and a half. More capacious batteries will retain their operational properties without tangible losses for about two years, and possibly longer.

Do not forget that the "health" of batteries depends on the quality of the charger used (it is important that overcharging does not occur - this is harmful to batteries). But excessive discharge also shortens their service life. General rule It can be assumed that for lithium batteries, the maximum allowable charge is 4.2 V, the minimum discharge level is 2.9 V.

It is more convenient for a beginner to use power supplies with electronics. Which, in addition to providing a stable voltage (or even the ability to adjust it), most often protect batteries from excessive discharge (the electronics stop supplying voltage).

Naturally, dear readers, we discussed a small part of the possible issues. But for now, that's enough. In the next article, we will summarize the general results of the ABC of Vaping.

Sincerely,
Vladislav Karabas

_______________________

It is more convenient to continue to get acquainted with the "ABC of Vaping" from the article "The ABC of Vaping: General Results":

[articles in this series do not provide for discussion, as they display personal experience and the prevailing opinion/representation of the author]

To follow the announcements and updates of the site materials, you can subscribe to notifications by e-mail. The mailing takes place through Google feedburner, so you can not be afraid of spam and other inconveniences.

up

Thank you for choosing a Joyetech product! Please read this manual carefully before using the device to make sure you are doing everything correctly. If you need more information, please consult the seller or visit our website: www.joyetech.com

About the product

up

The eGo AIO minimizes the risk of leaks with a 2ml e-liquid refill tank. Reliable protection from children is provided by a twisting pressure tank cover and a lock function (pressing the main button five times to turn the power on / off). The device is extremely simple and convenient to use. The case is presented in several colors, and the indicator light has 7 different colors. The simplicity and efficiency of this device is what makes it so popular and unique in its kind.

The device is made of ecological plastic, the mouthpiece has a unique spiral design.

Management and maintenance

up

Turning on and off

Press the main button 5 times at minimum intervals. The button will flash 5 times to indicate that the eGo AIO is ready to use. A repeated series of 5 quick presses turns off the device.

soaring

Press the button and start tightening.

Charger

The eGo AIO is charged via a USB cable connected to an AC adapter or a computer. When charging is complete, the indicator light will turn off.

Liquid filling

To unscrew the cap, press it and fill the liquid into the tank (capacity - 2 ml).

Notes:

• Do not fill liquid above the maximum level mark to avoid leakage during assembly.
• To avoid burning the wick, be sure to put a few drops of liquid into the holes of the evaporator before the first use.

Evaporator replacement

To unlock the safety lock, press the cover and unscrew it. To replace the evaporator, unscrew it and replace it with a new one, or clean and reinstall the previously used evaporator. (Note: Do not wash the evaporator with water! Simply wipe it with an alcohol-soaked or dry cloth).

Disabling or changing the color of the indicator light

In the off state, press the main button until the indicator turns on, then press the main button to switch colors (red, yellow, green, blue, indigo, white, purple or turn off the indicator).

Tightening adjustment

Turn the ring on the cap clockwise or counterclockwise to adjust the intake air. The easiest tightening is achieved when the marks on the ring and the body are aligned.

Protective functions

up

Short circuit protection:

• If a short circuit occurs before vaping begins, the indicator light will flash 5 times and the power will turn off.
• If a short circuit occurs while vaping, the indicator light will flash 3 times.

Evaporator protection

The eGo AIO features a 15-second puff protection on timer. If the main button is pressed for more than 15 seconds, the indicator light will flash 10 times.

Low voltage protection

When the battery voltage is less than 3.3 V, the indicator light flashes 40 times and the device turns off. The low voltage protection will be unlocked when the device is charged.

Low/high resistance protection

• When the vaporizer resistance is more than 5 ohms, the indicator light flashes slowly when the main button is pressed.
• If the resistance is less than 0.3 ohm, the indicator light flashes 5 times quickly, which indicates that the voltage is too low or a short circuit is likely.

Remaining battery display function

The indicator flashes slowly or stays on when the battery charge is high. Rapid flashing of the indicator light indicates low battery. When charging or connecting the USB cable, the indicator lights red and turns off when charging is complete.

Warnings and Precautions

up

1. Vaporizers for eGo AIO can only work with subwoofer compatible batteries.
2. Turn off the eGo AIO every time you finish using it.
3. Do not press the main button when the eGo AIO is not in use.
4. Repairs to the eGo AIO should only be made by qualified Joyetech personnel. Do not attempt to repair the device yourself, as this may result in damage to the device or injury.
5. The eGo AIO must be operated in dry conditions at -10°C to 60°C and charged at temperatures between 0°C and 45°C.
6. eGo AIO is assembled from original Joyetech components. The use of non-certified components in the eGo AIO may result in device malfunction and/or damage.

Warranty Terms

up

Please refer to the Joyetech Warranty Card for warranty information. The warranty does not cover damage caused by the user. The warranty does not apply to products purchased from third party vendors.

Joyetech undertakes to repair the product under warranty in accordance with the following rules:

1. This warranty entitles you to free repair of defective Joyetech products. The warranty period is 90 days from the date of purchase by the end user.

2. This warranty may be void in the following cases:

• The user does not provide a warranty card and a receipt confirming the purchase.
• Damage to the device caused by incorrect use or unauthorized repair.
• Damage to the device caused by strong mechanical impact, such as being dropped.
• Damage to the device is caused by non-compliance with the recommended conditions of use (the list of warnings is indicated in the instructions).
• Damage to the device caused by improper use of water or other liquids (refer to the manual for operating instructions).
• Damage to the device is caused by non-Joyetech components (charger, batteries and charging cable).

3. This warranty does not cover consumables and accessories, including (but not limited to): mouthpieces, cartridges, vaporizers, etc.

4. This warranty does not apply to non-Joyetech products. The warranty is valid only for licensed Joyetech products during the warranty period of 90 days from the date of purchase.

Joyetech reserves the right of final decision on all warranty claims. Joyetech may interpret and revise the contents of the warranty terms.

Standard e-cigarette vaporizers are the forerunners of the modern atomizer systems (clearomizers, cartomizers, tanks, giantomizers, etc.) used in ECs today. Therefore, knowing their device will help you more easily navigate the various new products on the market for vaping.

Replacement vaporizers for electronic cigarettes work on the principle of heating a liquid and transforming it into a vapor state. This is what the smoker inhales. If we describe the evaporator in ordinary words, then this is a steel cylindrical flask. Inside the flask is a ceramic cup with a built-in evaporation system.

The vaporizer for electronic cigarettes has the following structure: parts of the wick wrapped in a spiral, plus the contacts of the spiral. These contacts permeate various devices and eventually connect to the battery.

On top of the evaporative system, there is usually a steel bridge wrapped in metafoam. It serves to protect the coil from various deformations and the transfer of liquid from the cartridge to the electronic evaporator.

Since nichrome of various sections and sizes is used in evaporators, they can be divided into types according to the level of resistance:

• HV - high-resistance vaporizer for electronic cigarettes (more than 2 ohms). Used with high voltage electronic cigarette mods.
• Standard replaceable coils (2-2.7 ohms). Considered the best option for ES.
• LR - low-resistance replaceable evaporators (up to 1.7 Ohm). A lot of smoke, aroma, but can scare the smoker with an "extreme" level of evaporation.

How to increase the service life

Regardless of the design features and intensity of operation, the electronic evaporator fails sooner or later. Over time, even high-quality replacement evaporators lose their original aroma transfer and vaporization properties. This is affected not only by the wear of parts, but also by a large amount of soot on the spiral. This is the main factor leading to the fact that both individual elements and the entire device begin to work worse.

The main component that creates carbon deposits are flavorings. That is why people who use unflavoured liquids have almost no such problems. Quite naturally, the question arises: how to remove carbon deposits from the coil of an electronic cigarette?

Please note that the electronic evaporator, like the liquid, is a consumable. It is quite possible to solve the problem with soot and improve the operation of the evaporator with your own hands. However, these actions are at your own peril and risk, since replaceable evaporators of an electronic cigarette may not withstand your manipulations and completely fail.

To clean the evaporators or not, it's up to you. At the same time, do not forget that manufacturers remove the warranty on the electronic cigarette vaporizer if at least one cleaning has been carried out.

Cleaning order

To make replacement evaporators last longer, you can periodically clean the wick. This will remove carbon deposits from its surface. We offer you step by step instructions:

1. Disconnect the electronic cigarette vaporizer from the cartridge and battery.
2. Wash it under a gentle stream of warm water.
3. Blow through the side of the cartridge to remove any remaining liquid and carbon deposits.
4. Do steps 2 and 3 twice.
5. Dry the element thoroughly with a non-hot hair dryer, on the radiator, on the blinds of the air conditioner.
6. Plug the part back into the electronic cigarette. Add a few drops of liquid to it, wait a couple of minutes for it to moisten the wick. This is important, because after our actions, the electronic evaporator will be completely dry, and the wick will immediately burn when voltage is applied from the battery.
7. Replaceable cigarette vaporizers are ready for use.

If you carry out these manipulations at least once every 2 weeks, then the electronic evaporator will work much longer. At the same time, you will not allow the appearance of soot on the wick. In addition, EC manufacturers in the instructions indicate their requirements on how to properly operate and maintain replacement evaporators of a particular model.

Video

Watch our video to find out which vaporizers are best for beginners.

An electronic cigarette is a device that vaporizes nicotine liquid. Inhalation of steam through vape allows a person to get similar sensations that are achieved with traditional smoking. Battery-powered devices that vaporize nicotine solution are much safer than conventional cigarettes, the harm of which is known to everyone.

E-cigarettes appeared on sale recently, so many people who are looking for alternative smoking options often have the question of how to use them and what to look for when choosing.

What you need to know about the correct use of an electronic cigarette?

An alternative replacement for traditional smoking is undoubtedly electronic cigarette, instruction manual to which allows you to quickly assemble and use the device. It consists of several elements - an evaporator, an atomizer and a battery. Today, a wide selection of vapes is on sale, but, despite their variety, they all have general principle action and use.

Starter kits contain everything necessary components and elements. The main thing is to correctly assemble and prepare the device for soaring. Assembly and refilling should not be difficult, as each product comes with detailed instructions. Installing a new vaporizer and battery puts the appliance into standby mode. After preliminary instillation of the evaporator and refueling of the atomizer, a person can calmly take the first puff.

It is necessary to replace the evaporator if, during steaming, the amount of steam has significantly decreased, bitterness has appeared. You can determine that the battery is dead by the color indicator, which is located on the front of the case or on the screen. The constant glow of the button indicates that it is time to recharge the lithium battery.

• timely replacement of the evaporator - 1-2 times a month with intensive vaping;
• the ability to replace nicotine liquid with nicotine-free;
• careful care of the atomizer - cleaning and rinsing in clean water;
• smooth puffs, lasting no more than 4 seconds, so that there is no overheating;
• the optimal amount of liquid (it should not be much and little);
• after purchase, you need to fully charge and discharge the device 3 times without additional recharging (for lithium-polymer batteries).

soaring will only be enjoyable if vape will be completely correct. Do not neglect the precautions that help to avoid unpleasant consequences from improper operation and storage. The device must not be left in the open sun, in damp rooms. The vape and all its components must be kept out of the reach of children.

Lithium batteries require proper charging. The battery must be inserted into the appropriate socket of the charger and connected to the mains. For these purposes, a conventional, household network with a voltage of up to 250V is suitable. Before removing the battery from the charger, it must be disconnected from the mains. This will prevent damage to the components.

– a high-quality battery recommended for work in combination with battery mods that need high-current batteries. The battery is designed specifically for electronic cigarettes, so the vaper can be sure that the vaping process is completely safe.

Battery IJOY 21700 (3750mAh, 40A)- High-current 21700 format battery, suitable for many vaping devices using a similar form factor. The novelty is created on the basis of innovative technologies, is safe, has a high capacity. The battery is able to provide long-term autonomy to the e-cigarette, which is used in active mode.

When moving the vape in your pocket, bag, you should disconnect the battery. An electronic cigarette is a fragile device, so you need to avoid any mechanical impact on it - squeezing, falling, hitting. With proper use and care, a vape will last a long enough time, which will not only save money, but also reduce the harm from nicotine, which comes with toxic substances from a regular cigarette.

Pons Slim: instructions for use

Screw the battery onto the USB adapter. Insert the USB adapter with the battery screwed onto it into the USB socket of the 220V charger or into the USB port of the computer. When the battery is charged, the LED at the end of the battery will turn off.

Charging the battery lasts 2-3 hours. The first time, the battery needs to be charged for 5 hours.

Screw a fully charged battery onto the atomizer.

Put the cartridge on the atomizer. Please note that initially a protective cap is installed on the atomizer, not a cartridge. Replace it with a cartridge for the first time use. Smoking a pons cigarette with a protective cap instead of a cartridge can damage it.

Puff on a pons cigarette in the same way as a traditional one. The LED at the end of the cigarette will light up in time with the puffs. This means that the pons cigarette is working correctly.

A flashing LED on the pons cigarette indicates that the battery is dead.

One cartridge is enough for about 150 puffs. If there is no steam when the battery is charged, then the cartridge is over.

To replace an empty cartridge, pull it off the atomizer, holding the pons cigarette by the battery. Install a new cartridge, putting it all the way onto the atomizer.

Pons cigarette cartridges contain propylene glycol, nicotine, flavoring agents and other ingredients that can satisfy the needs of the most demanding consumers.