What are the best dental implants. Which dental implants are the best Which implants are the best

Any patient is interested in the question - which dental implants are the best? Which dental implants provide high quality at an affordable price? What implants are better to bypass and try not to mess with them? We will try to answer all these questions below.

MIS

Medical Implant System is the second most popular Israeli manufacturer. Was founded in 1995. Nothing particularly outstanding or particularly bad can be said about these implants. Provide good quality, the cost is even slightly lower than that of Alfa Bio products. In our opinion, they are slightly inferior in quality to analogues from Alfa Bio, but also cheaper. The average installation cost is 30,000 rubles.

Adin

As mentioned above, the company was founded in 1971, but appeared in Russia only in 2012. That is why they are not very well known among Russian consumers. The cost of production is lower than that of Alfa Bio and MIS.

Adin claims to have its own research center and its own staff of scientists. The main features are as follows:

The cost is lower than that of the main competitors.
The Immediate Loading proprietary protocol, which allows you to install bridges on 4 or 6 specially located implants (in essence, it tries to repeat the All-on-4 technology from Nobel Biocare).
Proprietary patented titanium alloy.
Compliance with all strict global standards: CE (European certification) and FDA.
OsseoFix surface.
Some models have a lifetime warranty.

It should be added that although Adin claims to meet the high standards of its products, certain statistics on survival have been collected during the company's presence in the Russian market. Namely, Adin implants showed a real survival rate of 95.5-97.5%, Alpha Bio shows a survival rate of at least 98%.

The survival rate is higher with the classical two-stage implantation technique. When implanting with immediate loading, the percentage of implantation is higher by 1.5-2.5%.

Also, implantologists do not speak very well about the instrumentation supplied by Adin. There is a widespread opinion in the professional environment that the toolkit is made in China.

Based on the facts described above, we can conclude that Adin is somewhat cunning when talking about the quality of its products similar to Alfa Bio and MIS. Still, the lower cost leaves its mark on the quality.

Ards

The production of implants began in 2005. In terms of popularity in Russia, they are the third brand after Alpha Bio and MIS.

They differ from the rest by a specially developed technique for drilling and implanting an implant, in which it is possible to significantly reduce consumption bone tissue(declared up to 40% savings compared to competitors).

Implants are used in almost all clinical cases, including express implantation.

In general, these are quality products for an adequate cost (the same as Alfa Bio and Mies), the quality is similar. A serious problem is not the highest popularity of these implants among doctors in Russia, and in view of this, there is little clinical experience.

Implants from South Korea

South Korea, following Israel, rushed to conquer the dental implant market. On the this moment local producers occupy 80% of the domestic South Korean market.

Osstem

Appeared in 1992. Osstem itself claims on its website that it is the 5th implant manufacturer in the world. Unfortunately, we cannot confirm this information in any other way. And the first in Asia (most likely this is true).

A very big plus is that the company produces a huge range of products, including related products: instruments, abutments, allogeneic materials, etc. This allows you to provide doctors to the maximum.

In the domestic Korean market, Osstem positions itself as a manufacturer of premium implants - for the Russian consumer, this means an attempt to actively compete with Alpha Bio (in principle, they are doing quite well).

The conclusion on Osstem implants is as follows:

Quality products from a great company.
Quality tends to Israeli counterparts. The main competitor is Alpha Bio, we can definitely say that Osstem cannot be of the same quality (very close), but they are definitely superior to Adin and no worse than Ards and MIS.
The cost is usually slightly higher than that of Israeli competitors. On average, you will have to pay 35,000 rubles for one Osstem implant.
The installation of these implants has a number of unusual features, which is why some implantologists tend to bypass them. Doctors who have been trained by Osstem provide a quality level of treatment.

Anyridge

The manufacturer, Megagen, calls them “implants of tomorrow” and considers them premium products (most likely this is true in the South Korean market). The following features can be noted:

Lifetime warranty.
Nanospraying on the surface - calcium ions accelerate the process of osseointegration.
Really big assortment.
Reduced trauma during installation (this is the “technology of tomorrow”), however, this requires high qualifications and additional training for the doctor.
The cost is above average (among Korean ones) - from 45,000 rubles per one (the cost is comparable even to some European manufacturers).
Unusual thread design - many doctors call them “aggressive”, due to the fact that the thread is very, very wide (this is unusual for some Russian implantologists).
Those doctors who use note the advantages of this thread in the form of extremely high primary stabilization (the implant will not fall out), this is really a plus.
Very high installation speed. In this regard, Anyridge breaks records - it is theoretically possible to place an implant in 60 seconds. In fairness, it should be said that this is far from the most important thing in dental implantation.
Most often, these implants are used for express implantation (according to your described advantages, this may be clear).

The conclusion on these implants is as follows: an interesting, high-tech and sufficiently high-quality product, you can put it, but only with a qualified doctor, well, do not forget about their higher cost.

More recently, the company has released AnyOne implants. They are widely used in the USA and South Korea. The reviews are extremely positive and are noted that they are more interesting than Anyridge. In Russia, this is still a curiosity.

Implantium

They are produced by the Dentium company - therefore, when they say Dentium, they mean Implantium. The first products began to be produced in 2000, and appeared on the Russian market in 2007.

These implants are used exclusively with a two-stage implantation technique. Nothing bad can be said about this implant, but nothing supernatural either. Implantologists speak of them in exactly the same way - they indicate that the implants are good, but nothing special. Patients, judging by the reviews, also have no particular complaints.

Conclusion: normal quality, however, in our opinion, the price is slightly too high.

Russian dental implants

Niko

The company makes them Rusimplant and earlier they were known under the name "Liko". Thus, if you hear Rusimplant, Niko, Niko, Liko - it's one and the same.

The implants were developed with the participation of German specialists and are produced on German equipment (this is true). Manufacturers even talk about a joint Russian-German venture. Their main advantage is their low cost - 2 times cheaper than Israeli and Korean ones, and 4 times cheaper than European and American ones. In essence, they are a copy of foreign analogues (many doctors “recognize” implants from Astra Tech in them), but under the Russian mentality and consumers.

In principle, these implants more than justify their price. They are cheap, they take root, they are normally installed (doctors do not experience any particular difficulties). Based on the available statistics, these implants normally cope with the restoration of chewing teeth and those teeth that are not visible. There is a convenient shape (copied from foreign analogues) and a micro-rough surface made according to German technology. Restoration of teeth in the smile zone is not their forte, they cannot provide the same level of aesthetics as foreign competitors.

The range is wide and allows them to be used both with a one-stage technique and with a classic two-stage implantation.

The conclusion on these implants is as follows: it can be used with a limited budget and when restoring chewing teeth (those that are not visible), when restoring front teeth, it is better to spend money on better foreign analogues. You should not be very afraid of them (like some of our compatriots) - for your money this is very good.

Conmet

Another Russian manufacturer. He tries, works, improves his products. It's just as cheap, it has the same problems. You can use it, but be careful.

The cost of dental implants from different manufacturers

So, let's summarize all the information received in a cost summary table. We will take into account the installation of the 1st implant.

Premium Implants:

#	Manufacturer	The country	Installation cost (rub.)
1	Nobel Biocare	USA-Sweden-Switzerland	60 000 - 80 000
2	Biohorizons	USA	50 000 - 60 000
3	Bicon	USA	45 000 - 55 000
4	Astra Technology	Sweden	55 000 - 75 000
5	Straumann	Switzerland	55 000 - 75 000
6	root*	Switzerland	35 000 - 40 000
7	SgS	Switzerland	40 000 - 55 000
8	Biomed*	Switzerland	45 000 - 50 000
9	Xive	Germany	45 000 - 50 000
10	Ankylos	Germany	50 000 - 60 000
11	Denti System	Germany	50 000 - 60 000
12	Semados	Germany	50 000 - 60 000
13	Impro	Germany	50 000 - 60 000
14	Icx	Germany	45 000 - 55 000
15	Alpha Bio	Israel	30 000 - 35 000
16	MIS	Israel	30 000 - 35 000
17	Adin	Israel	25 000 - 30 000
18	Ards	Israel	30 000 - 35 000
19	Osstem	South Korea	35 000 - 40 000
20	Anyridge	South Korea	45 000 - 50 000
21	Implantium	South Korea	35 000 - 40 000
22	Niko	Russia	10 000 - 15 000
23	Conmet	Russia	10 000 - 15 000

*this technique is cheaper than the traditional one by 25-35%

Rating of manufacturers of dental implants

There are more than 40 different manufacturers of dental implants on the Russian market. The 23 brands presented in this article occupy more than 98% of the Russian market, so it makes sense to confine ourselves to them when compiling the rating.

It is difficult for a person who does not have a medical education to decide independently on the choice of implants to restore the aesthetics of the dentition. In this case, only a specialist can determine the appropriate type of construction. It should take into account the physiological features of the structure of the jaw, the general health of the patient and the characteristics of the problem.

Criterias of choice

Negative consequences after implantation most often arise due to the fact that the specialist chose the wrong orthodontic structures. Among the complications, rejection of a foreign object, inflammatory processes in oral cavity, prolapse of the implant.

When choosing a suitable material, the specialist must consider the following factors:

the quality and coating of the metal rod, which serves as a replacement for the natural root system of the tooth;
the level of engraftment of the material;
the service life of the structure, verified experimentally;
the ratio of quality and price of the product;
the shape, size and length of the artificial tooth;
aesthetic qualities of the crown part of the implant.

Which dental implants are best? According to dentists, the best are the products of Austrian, German and Swiss companies. However, there are many worthy analogues produced by domestic, American and Korean companies. It is very important that the doctor is aware of the features of the chosen design and knows how to work with it.

Famous brands that produce prostheses involve training specialists from around the world. Only after passing the certification, the product can be implanted in patients. Thanks to this rule, it is possible to minimize the risk of rejection of the product and increase its service life.

When choosing a design, it is very important to pay attention to the material from which it is made. The best designs are those made of titanium. Therefore, it is desirable that the amount of material in them be maximum (the best option is 99%). The higher the percentage of titanium contained in the implant, the more expensive it will cost.

In addition to titanium, artificial teeth can include zirconium oxide and tantalum, which are characterized by a high level of strength. The latter type of material takes root faster than titanium

When choosing an implant, it is also necessary to take into account the fact that in shape, color and size it must correspond to natural teeth. The most common type of design is cone-shaped, since such teeth allow the best distribution of the chewing load between different parts of the jaw. Cone-shaped artificial elements take root faster than designs of other forms. Another popular form of structures is cylindrical.

The dimensions of the structure should be selected taking into account the following factors:

the width and volume of the jaw bones in the place where the titanium pin will be implanted;
distance between teeth;
the presence of bite defects;
individual features of the structure of the jaw.

The minimum possible length of the implant is 1.8 mm, the maximum is 16 mm. The optimal pin diameter is selected individually in each case.

Criteria for choosing a clinic

The success of the procedure associated with the installation of the implant, largely depends on the experience of the doctor. When choosing a suitable clinic, the following factors should be considered:

Qualification of a doctor (not work experience). Some young doctors with little experience (5-7 years) are constantly improving their skills and taking additional training courses, while specialists with “experience” rely only on many years of experience.
The brand of implant products that is used by the doctor to perform the intervention. It is better if the patient is offered dental implants of well-known brands. Such products will cost much more, but their service life will be longer.
Availability of a guarantee from the clinic for the products used. Before implantation, the patient must clarify whether he will be given a passport and a guarantee for the design. Clinics that enjoy a good reputation always give the listed list of documents to the hands of the patient.
The possibility of providing a guarantee for the service (at least 2 years). In this case, the patient will need to undergo professional cleaning teeth every 6 months to prevent the risk of rejection of the artificial tooth.

Before you visit the clinic, you need to read reviews on the Internet about it and the doctors who work there. It is also important that the selected medical institution has modern equipment for intervention and preliminary diagnostic measures - computed tomography, surgical templates, diode laser. In clinics where these types of equipment are not available, even an experienced implantologist can make a mistake, as he has to work blindly. A huge plus for a clinic dealing with implantation and prosthetics is the presence of its own dental laboratory.

Preferred types of construction

Implants are divided into 2 large groups - endosseous and intraosseous. They, in turn, are divided into several types of structures, depending on the installation method:

Subperiosteal- are fixed under the periosteum. This type of implant is considered the most difficult to install. In appearance, it resembles a thin metal mesh, to which teeth are then fixed. Artificial elements are not bonded to the jaw bones, so they are more prone to breakage.
Basal. They are used with insufficient density or width of the jaw bones and put on chewing teeth when bone grafting is not possible. Artificial teeth during basal implantation are installed in the initial layers of the jaw, since they are less susceptible to degenerative processes. The advantage of this type of construction is that the crown can be placed within a few days after the introduction of the pin.
intramucosal. Designs are placed under the mucous gums and have buttons to which bridges are attached. These designs are used only as a basis for fixing an existing denture. Intramucosal products consist of 2 main parts, one of which is attached to the prosthesis, and the second to the gum. Implantation using this type of construction is not possible with a mucosal height of less than 2.2 mm.
Endodontic. The main purpose of the products is to fix a loose tooth. The implant can be placed in one stage, without removing its own element and is painless for the patient.

The shape of the implants are screw, cylindrical and lamellar. The first type of product got its name because of the similarity with the screw. They are installed in the bone tissue of the gums at the required angle without significant damage to the gums. As a result, the recovery period is shorter.

Cylindrical designs do not have threads, they are smooth and even in shape. The level of engraftment of cylindrical implants increases due to surface treatment with special compositions.

Plate implants are installed in people with insufficient volume of jaw bones, in cases where the installation of products of a traditional shape is contraindicated. The main disadvantage of the plates is a long engraftment period (up to 6 months)

Rating of expensive implants

Products of the Swiss manufacturing company are in the first place in terms of the quality of materials and service life. They can be used in almost all clinical cases. A distinctive feature of the designs is a conical shape, double thread, life imprisonment operation. The cost of structures is from 40 to 70 thousand rubles per unit. Consider the best premium products:

Astra Tech (manufacturer Sweden). The main advantages of the product are a small thread; unique contact contour between implant and abutment; Osseo Speed coating, which contributes to better engraftment of the material; easy and strong fixation in the oral cavity.
Straumann (manufacturer Switzerland). The company has been producing and supplying prostheses and implants for 60 years. For the production of implants, only the highest quality materials are used - ceramics, zirconium, titanium, leucosapphire. The cost of 1 unit is up to 75 thousand rubles.
Ankylos (France) - a titanium product with increased rates strength, and resistant to a variety of external factors. The cost of 1 artificial tooth is 30-40 thousand rubles.
BioHorizons (USA). Implants consist of a special metal alloy, they are distinguished by a rough structure and strength. The thread of the pin is shaped like a beveled wedge. Ideal for restoring anterior teeth. The price of American prostheses varies in the range of 35-55 thousand rubles.

Rating of implants of the middle class

Any Ridge from Megadgen (manufacturer South Korea). They consist of titanium with the addition of a modern coating - calcium ions. They are used to restore the dentition in patients with a narrow jaw when it is impossible to perform bone grafting. The cost of 1 design is 25-38 thousand rubles.
Medical Implant System (Israel). By production of designs the bioinert titan is used. The company offers 7 various kinds models adapted to individual clinical cases. The warranty period for structures is an average of 5 years. The price of implants is 19-45 thousand rubles.
Schutz (Germany). The design feature of the implant is a non-separable function. The survival rate of the material from which the product is made is 97%. The cost per unit is 35-45 thousand rubles.
Niko (Russia). The design is based on high-quality German titanium, which is characterized by a low risk of developing allergic reactions from the mucous membranes of the mouth and high survival rate. The latter property is provided by the hexagonal shape of the intraosseous part of the pin.
Zimmer - mini-implants made of tantalum. The material is characterized by hypoallergenicity and excellent biological compatibility with oral tissues. Mini-implants can be installed even in patients with severe bone thinning.

Rating of cheap implants

Among the best budget options for designs are:

Ards (Israel). The unique patented shape of the design allows you to evenly distribute the load on the jaw when chewing. The company offers 3 models of implants that differ from each other in diameter and length. The cost of one unit is up to 25 thousand rubles.
AlphaBio (Israel) - an implant with a rough surface with a conical shape. The price of the product is from 15 to 24 thousand rubles.
Konment (Russia). Produced from aluminum oxide with titanium dry solution. Designs are suitable for both one-stage and traditional dental implantation. The cost of 1 artificial tooth is 6-15 thousand rubles.

Dental implantation originates in the middle of the last century - however, during this time it has undergone noticeable changes, and not only the methods of installing implants have changed, but also their appearance. Many researchers are working to create the perfect implant. So that it does not cause discomfort to the owner, its installation does not injure the surrounding tissues, so that it takes root as quickly as possible and without inflammatory processes.

It is also important that the design withstand even the highest loads and not be rejected even in the presence of inflammation of the oral cavity. This is the ideal implant, which is still being developed by millions of researchers from world universities and companies that create products for restoring teeth.

What affects the quality and survival of implants?

When creating implants, modern scientists use two dominant approaches that were developed in the last century:

Modern dental implants: which are the best?

Today, dental implants have almost reached their ideality - they are rarely rejected, take root quickly, and do not destroy bone tissue. But this result was obtained solely through practice and mistakes - millions of dollars were spent in order to achieve the ideal design. But, of course, scientists have something to strive for, and every year more and more new designs will appear, more ideal and perfect.

Today, researchers are trying to combine the two approaches to creating implants as efficiently as possible - however, as always. Designs must have an ideal shape and composition for fast and high-quality engraftment in the patient's bone. It is hard to imagine, but after all, just a few decades ago, implants took root much less often than now - they often destroyed bone tissue, since they were much stronger than it and under load it crumbled into small pieces. Often, the composition of the materials used contained third-party impurities that were not at all perceived properly by the patient's body.

It can be said for sure that scientists will continue to work on improving implants for restoring teeth. After all, our world is actively developing and what seems ideal today, literally in five years will become hopelessly outdated.

TOP 10 manufacturers of the best implants:

The following list of TOP 10 brands of dental implants is based on the availability of long-term results, as well as recommendations from patients, implantologists and international symposiums. You can navigate through this list, but still make the final choice only after consulting with your doctor. So, as soon as a doctor can determine your individual characteristics of the structure of bone tissue, bite, the interaction of metals with the body.

Where is the best place to place implants?

The most popular and difficult question facing a patient who decides to install dental implants. Really good clinics and there are many doctors today, after all, implantation has been used in our country for about 20 years, and during this time, domestic specialists have accumulated their own experience and professionalism.

Criteria for choosing a good clinic and doctor

In the network of dental partners of the Hotline for Dental Implantation, you can have a consultation with an implantologist absolutely free of charge at the clinic closest to you.

Anastasia Vorontsova

Dental implants are currently an excellent alternative to prosthetics.

There are many models of implants on the dental market, both from leading manufacturers and not well-known ones, which differ not only in quality, but also in cost.

To decide which dental implants are the best, you need to know not only the advantages, but also the disadvantages of the proposed models.

A dental implant consists of an implant (artificial root) installed in the jawbone in place of a lost tooth and an abutment - a structure that connects the implant to the denture.

It should be noted that in case of any breakage, the abutment, like the crown, can always be replaced, while the implant is implanted into the jawbone forever.

Kinds

There are several types of implants that differ in shape, strength and technology of implantation:

Root-shaped implants have a cylindrical shape with a thread applied to the surface. They are the most popular designs. They are used only if there is a sufficient amount of bone tissue.
Lamellar implants, allowing to penetrate to the maximum depth into the bone tissue, which will give stability to the structure. They are used when it is impossible to implant a root-shaped implant.
Combined designs are different complex shape. They are a combination of the two previous types of implants. They are used in the presence of defects in the teeth.
Intramucosal implants that do not require fixation in the bone tissue. used for stabilization removable dentures.
Endodontically stabilized, according to most dentists, are the most reliable. When they are installed, there is no risk of injury to the oral mucosa. Used to lengthen and strengthen the root of the tooth.
Subperiosteal implants are used when the patient has very thin bone tissue. They are installed under the gum and are firmly fixed between the bone and the periosteum.

Implant Selection Criteria

Despite the huge selection of implant systems, it is necessary to be guided by some basic criteria:

implant survival. Root-shaped structures made of titanium are biologically compatible with human body tissues.
Simplicity of implantation of the structure. The simpler the implants to install, the easier the coordination of surgical and orthopedic actions.
The possibility of implantation without bone grafting. In this case, the duration of treatment is reduced.
Availability of a quality certificate for the implant and an official dealer of the company in Russia. Otherwise, the possibility of a fake design is not ruled out.
Titanium Root Durability.
The presence of a microporous implant surface promotes faster osseointegration than if the implant surface is smooth.
Features of the thread and the method of connecting the implant to the abutment. The best option is to have a micro-thread without a polished neck.
The presence of an aesthetic component. The wrong choice of implant can cause such a defect as translucence through the gum. In this regard, you will need to listen to the recommendations of the doctor.
Construction cost. Some clinics are either dealers themselves or provide significant discounts on the products of the implant manufacturer.

Video: “Implants. How to restore the dentition »

What to look out for

materials

To date, titanium and its alloys are recognized as the best material for the manufacture of implants.

Its advantages are that it is not rejected by the body and has high resistance and anti-corrosion properties.

It is important that the structure be made of high quality titanium (at least Grade 5), as lower quality titanium contains impurities that prevent successful osseointegration.

Construction surface

In order for the implant to fuse with the bone tissue faster, its surface is treated in such a way as to give it a microrelief that repeats the structure of the bone.
The surface of the structure is made porous by plasma spraying, anodizing, sandblasting, acid etching, or a combination of these techniques.
To improve osseointegration, hydroxyapatite and phosphate crystals are applied to the implant surface, which allow bone tissue to grow into the pores of the titanium root surface.

Implants with a polished and smooth surface fuse with the bone very poorly.

Availability of available sizes

Russian implant manufacturers offer a choice of at least four sizes of diameters and lengths of structures from 6 to 16 mm, which allows you to choose an implant for various clinical conditions.

A small range of designs cannot guarantee the quality of treatment.

Implant shape

Quality implants should be conical or have a patented platform switching system.
This type of construction has the fastest and highest quality survival rate.
An important point is also that the chewing load is correctly distributed on such titanium roots.

Thread

The presence of different densities in different parts of the bone tissue was taken into account by manufacturers of high-quality implants.

The application of several types of thread on one implant allows for high-quality fixation of the structure in the bone tissue in various clinical situations.

If the implant has less than two or three types of cutting, then it should be discarded.

Tools and equipment

During implantation, the position or marker must be controlled.
Therefore, the clinic should be equipped with a CT scanner or a system for performing orthopantomography.
An important component of a successful implantation is the presence of a cooling system.
In order to prevent burns to the bone tissue, the drills should be cooled with saline during the preparation of the implant site.

Type of internal connection

The implant is connected to the crown with an abutment.

This site is one of the most fragile in most implant systems.

Often there is a fracture of the abutment or loosening of the abutment and crown.

Some implant manufacturers have introduced innovative abutment-to-implant attachment.

For example, a trihedral (three-channel) connection allows the most accurate positioning of the abutment and crown of the tooth, and also eliminates internal stress in the metal and fracture of the structure.

Manufacturer reputation

It is better to give preference to implants made in Europe or the USA, due to the fact that the products of these manufacturers fully comply with international quality standards.

Qualification of an implantologist

Under Russian law, a dental surgeon has the right to install dental implants, who must undergo a specialization in dental implantology.

Here is a list of documents that a specialist must have:

Graduate Diploma educational institution majoring in dentistry.
Certificate giving the right to engage in surgical practice.
The presence of a document confirming the qualifications of an implantologist.

Without the above documents, the doctor does not have the right to install implants and is obliged to present them to the patient upon request.

The best option is that all documentation for patients to review is posted in the reception area.

In addition, the dentist-implantologist must have a diploma of a specialist in the implantation of exactly the implant system that he offers to the patient.

The most trustworthy are specialists who are members of the European Association of Implantologists and the Russian Association of Dental Implantology.

This confirms the recognition of the doctor in the professional community.

Clinic status

The clinic where implants are installed must be licensed to perform such operations.

Implant Rating

To determine which dental implants are best, you need to know their survival rate, complication rate, and service life of the structures.

This requires certain statistics.

It is quite difficult to do this, since there are no two identical organisms, a similar structure of bone tissue.

Qualifications and experience of specialists may also differ.

Therefore, a non-expensive model installed by a professional can take root and last a sufficient period of time, while a more expensive one, in the hands of a novice dentist, can cause complications.

Survival rates can also be affected by an individual's immune response.

The data given in the table for implants differ in their characteristics and cost.

The reliability of these manufacturers is time-tested, therefore, for the success of implantation, it is necessary to find a qualified implantologist.

Place	Company and country of origin	Cost (in rubles for 1 implant)
1	Straumann (Switzerland), Astra Tech (Sweden), Nobel Biocare (Switzerland)	35000 — 55000
2	Xive Friadent (Germany) and Ankylos (Germany)	30000 — 40000
3	Bicon (USA), BioHorizons (USA), Biomet (USA)	20000 — 35000
4	MIS (Israel), AlphaBio (Israel), Ards (Israel), Implantium (South Korea)	12000 — 25000
5	Russia, Ukraine, Belarus	8000 — 15000

As you can see from the table:

The first place in the ranking is occupied by premium-class designs. They are of high quality and have a lifetime warranty. Firms together with implant systems offer modern technologies implantation, as well as train specialists.
Dental implants, ranked second, were created with the financial support of the German government. Unlike premium models, they are cheaper, but of sufficient quality.
In third place are American implants, which have average prices. They quickly take root, are securely fixed and do not cause discomfort to patients.
Budget implants produced by Israeli firms, as well as South Korean ones, are ranked fourth in the ranking. Despite the low cost, implants are of good quality and are in good demand. The percentage of engraftment of such structures is 98 - 99%.
The last place belongs to the cheapest implants produced in Russia, Belarus, Ukraine.